(1) make sure that the paper feed roller has stopped rotating, close the paper output tray, then follow the message to load three or more sheets of a4 or letter-sized plain paper in the front tray. (2) open the output tray extension, open the paper output tray, then extend the paper output support.. The paper cleans the paper feed roller as it feeds through the printer. repeat step 6 twice. if the problem is not resolved, turn off the printer, unplug the power plug, and then wipe the paper feed roller (a) located on the right side inside the rear tray with a moistened cotton swab or the like.. Paper feed problem the paper feed will not take up paper and gets caught on one side - canon pixma mp210 photo all-in-one question. question about canon pixma mp210 photo all-in-one printer. 1 answer . paper feed problem. the paper feed will not take up paper and gets caught on one side posted by h_francis1 on jun 14, 2010..
Paper feeding problems with canon printers can be related to the media (paper) condition, paper quality or the printer. paper not feeding properly can be accompanied by paper jams, too. printer and paper preparation can go a long way to alleviate these kinds of issues.. Archived from groups: comp.periphs.printers ( we bought a pixma 3000. the paper feed (upper paper supplier) grabs the paper on one side and crumples it as it goes into/through the printer. Clean the paper feed rollers with paper. make sure that the paper feed rollers have stopped rotating, load a sheet of a4 or letter-sized plain paper in the rear tray. pull out the paper output tray and the output tray extension..
